5.1 Surround System with RMC Room Mode Correction and RMC Calibration Kit. Includes LSR6328P (x5) and LSR6312SP (x1)

 

Active Nearfields From JBL!
All LSR6300 Series Studio Monitors employ Linear Spatial Reference Technology, are magnetically shielded, have mounting provisions, and are THX pm3 approved.

Powered Nearfield
The LSR6328P is the choice for stereo and multi-channel music and post audio applications where accuracy and high SPL are required. With ruler-flat +1 dB/-1.5 dB response from 50 Hz to 20 kHz, low frequency extension to 36 Hz, boundary compensation and JBL's new RMC™ system, the LSR6328P gives you exceptional low frequency performance in any room. The system is bi-amped with a 250 Watt LF amplifier and a 120 Watt HF amplifier. Wall mounting provisions make the LSR6328P perfect for installation in multi-channel editorial rooms.

LSR - Linear Spatial Reference Technology
LSR ensures that our speaders sound flat at the mix position. The exact geometry of the wave guide, the interaction of the woofer and tweeter, and the network are designed to provide an accurate listening window of +/- 30 degree horizontal, +/- 15 degree vertical. As a result, the reflected sound which reaches the mix position is smooth and accurate.

RMC - Room Mode Correction
The LSR6328P and LSR3612SP subwoofer are equipped with RMC - JBL's ingenious method of zeroing out bass problems at the mix position caused by room modes. A built-in 1/10th octave parametric EQ allows you to correct problems below 100Hz. The RMC Calibration Kit gives you everything you need to identify problematic room modes and tune your system. The LSR25P and LSR6332 enjoy the benefits of RMC when used in a system with the LSR6312SP Subwoofer.


Features:

• Advanced Linear Spatial Reference design ensures flatter-off-axis response for greater clarity at the mix position
  
• RMC Room Mode Correction provides electronic control of room modes. User measurement and calibration kit available.
  
• Differential Drive technology with dynamic braking for extended low frequency response and minimal power compression.
  
• Integrated bi-amplification with factory calibrated sensitivities.
  
• Titanium composite high frequency transducer with Elliptical Oblate Spheroidal waveguide for precise pattern control.
  
• Magnetically shielded high frequency transducer minimizes interference when used in close proximity to video monitors.
  
• High-density baffle for low enclosure resonance.
  
• Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
  
• Reinforced enclosure and convenient mounting points for mounted installation.
  
• Integral handles facilitate ease of positioning.